Menu

ALL OF YOUR FLYING INSECT control needs

call us or send an email today!

External link opens in new tab or window

☎ 800-776-5005☎ 800-776-5005

External link opens in new tab or window

☎ 281-259-0600 ☎ 281-259-0600

Troubleshooting Guide

Models SS 35, SS 50, SS 100

Problem

Possible Causes

Solutions

Insect control system does not work automatically

Circuit breaker may be tripped
Reservoir may be low or empty

Check your breaker
Refill with Py-Tech (Pyrethrum Insecticide)

Motor labors during operation (cuts on/off)

Operating pressure set too high
Suction filter may be clogged

Adjust pressure (150-160 psi). Never set above 175 psi
Clean or replace suction filter

All nozzles drip or spew during startup & shutdown (there is a delay between when the motor turns on and nozzles spray)

Air in tubing line to nozzles
Used a strong chemical that has damaged system O-Rings

Bleed air. If problem persists call for help 1-800-776-5005
Use only Py-Tech

Spray system does not register ample pressure (150 psi)

Suction filter may be clogged
Check valve may be clogged
Pump may be damaged
Pressure gauge may be faulty

Clean or replace
Clean or replace
Replace pump
Replace gauge

Some nozzles do not spray as good as others

Nozzle filters or internal parts may be clogged

Clean or replace spray tip only

NOTE: Pro-Tech’s insecticide and odor control solutions are specially formulated for Pro-Tech’s spraying systems with safety and performance in mind. They will not damage the seals and o-rings found throughout the pump, valves, and spray nozzles. Nor will they separate out of solution in the reservoir and tubing. Therefore, you will receive optimum performance with no nozzle clog. Using solutions other than Pro-Tech’s voids your warranty.

Pro-Tech Livestock Corporation

Business Info.

Mailing Address

P.O. Box 1450

Tomball, TX 77377

Contact Info.

Phone: 800-776-5005 / 281-259-0600

Fax: 281-259-4690

Email: CustomerService@protech-control.com